manualshive.com logo in svg

Allen-Bradley 1734-IB8S, Инструкция по установке и эксплуатации, Страница: 74 / 156

Поделиться
Скачать
Allen-Bradley 1734-IB8S Скачать руководство пользователя страница 74

74

Rockwell Automation Publication 1734-UM013C-EN-P - August 2010

Chapter 6

        Configure the Module in a GuardLogix Controller

6.

In the Safety Network Number box, use the default setting.

For a detailed explanation of the safety network number (SNN), see the 
GuardLogix Controller Systems Safety Reference Manual, publication 

1756-RM093

, noting that in most cases, you use the default provided by 

the RSLogix 5000 software.

The purpose of the Safety Network Number (SNN) is to make sure that 
every module in a system can be uniquely identified. We suggest that all 
safety modules on a network have the same SNN, to make documentation 
easier. During configuration, RSLogix 5000 software defaults a safety 
device’s SNN to match the SNN of the lowest safety node on the network.

7.

Click Change to edit the Module Definition.

This Module Definition dialog box appears.

8.

In the Series box, enter the input module’s series letter.

9.

In the Revision boxes, enter the input module’s revision numbers.

10.

From the Electronic Keying pull-down menu, choose the appropriate 
keying method for the input module.

11.

From the Configured By pull-down menu, choose the appropriate method 
by which this module is configured.

8

9

11

12
13
14

15

10

Choose

Description

Exact Match

All of the parameters must match or the inserted module 
rejects a connection to the controller.

Compatible Module

Allows an I/O module to determine whether it can emulate 
the module defined in the configuration sent from the 
controller.

Choose

Description

This Controller

This selection directs the controller to configure the Inputs 
and Test Outputs.

External Means

This selection directs the controller to establish a safety 
input connection only, and the controller will not configure 
the module or control the Test Outputs.

Содержание 1734-IB8S





























































































































































Отзывы:

Нет отзывов