Allen-Bradley 1734-IB8S Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 156

Allen-Bradley 1734-IB8S Скачать руководство пользователя страница 36

36

Rockwell Automation Publication 1734-UM013C-EN-P - August 2010

Chapter 2

Safety Functions

EMC Directive

Rockwell Automation devices that comply with EC directives also conform to
the related EMC standards so that they can more easily be built into other devices
or the overall machine. The actual products have been checked for conformity to
EMC standards. Whether they conform to the standards in the system used by
the customer, however, must be confirmed by the customer.

EMC-related performance of Rockwell Automation devices that comply with
EMC directive vary depending on the configuration, wiring, and other
conditions of the equipment or control panel in which the Rockwell Automation
devices are installed. The customer must, therefore, perform the final check to
confirm that devices and the overall machine conform to EMC standards.

North America

In North America, the TÜV-Rheinland type approval includes Guard I/O
compliance to the relevant standards and related information including the
following:

•

U.S. standards - ANSI RIA15.06, ANSI B11.19, NFPA 79

•

UL Listing to standards of U.S. and Canada when product is marked

«
...
34
35
36
37
38
...
»

Содержание 1734-IB8S





























































































































































Отзывы:

Нет отзывов