Allen-Bradley 1734-IB8S Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 156

Allen-Bradley 1734-IB8S Скачать руководство пользователя страница 15

Rockwell Automation Publication 1734-UM013C-EN-P - August 2010

15

POINT Guard I/O Overview

Chapter

1

–

Independently adjustable on and off delay is available per channel.

•

Test outputs (input modules only)

–

Separate test outputs are provided for short-circuit detection of a safety
input (or inputs).

–

Power (24V) can be supplied to devices, such as safety sensors.

–

Test outputs can be configured as standard outputs.

–

Specific test outputs can be used for broken wire detection of a muting
lamp.

•

Safety outputs

–

Solid state outputs
- Dual-channel mode provides redundant control by using two output
signals (channels), which allows use of the module for Safety Category
3, 4, and applications rated up to and including Performance Level e.
- Safety outputs can be pulse tested to detect field wiring shorts to 24V
DC.

•

I/O status data—In addition to I/O state data, the module includes status
data for monitoring I/O faults within each circuit.

•

Security—The configuration information of the module can be protected
by a password.

Safety System Architecture

POINT Guard I/O modules are used in the POINT I/O platform and can
communicate safety messages via network adapters to connect to EtherNet/IP or
DeviceNet networks.

Network

System

Adapter

(1)

(1) Not compatible with 1734-ADN, 1734-ADNX, 1734-APB, or 1734-ACNR adapters.

EtherNet/IP

GuardLogix

1734-AENT (firmware revision 3 or later)

1734-AENTR

DeviceNet

SmartGuard

1734-PDN

«
...
13
14
15
16
17
...
»

Содержание 1734-IB8S





























































































































































Отзывы:

Нет отзывов