Allen-Bradley 1734-IB8S Скачать руководство пользователя страница 130

Страница: 130 / 156

130

Rockwell Automation Publication 1734-UM013C-EN-P - August 2010

Chapter 9

Status Indicators

Power

Safe Input Status

(1734-IB8S module)

Safe Output Status

(1734-OB8S module)

Indicator

Status

Description

Recommended Action

PWR

Off

No field power applied.

Apply field power.

Green

Normal condition, field power supplied and within
specification.

None.

Yellow

Field power out of specification.

Check your connectors, wiring, and voltages.

Indicator

Status

Description

Recommended Action

0…7

Off

Safety input is off, or module is being configured.

Turn the safety input on or reconfigure the channel, if
desired.

Yellow

Safety input is on.

None.

Red

A fault in the external wiring or input circuit has been
detected.

Check configuration, field wiring, and devices. If no
problem found, replace module.

Flashing red

A fault in the partner input circuit of a dual-input
configuration has been detected.

Check the field wiring and verify your configuration for the
partner circuit. If no problem found, replace module.

Indicator

Status

Description

Recommended Action

0…7

Off

Safety output is off, or module is being configured.

Turn the safety output on or reconfigure the channel, if
desired.

Yellow

Safety output is on.

None.

Red

A fault in the output circuit has been detected.

Check the circuit wiring and end device. If no problem
found, replace module.

The tag values in a dual output configuration do not have
the same value.

Make sure logic is driving tag values to the same state (off
or on).

Flashing red

A fault in the partner output circuit of a dual-output
configuration has been detected.

Check the circuit wiring and end device of the partner. If no
problem found, replace module.

Содержание 1734-IB8S





























































































































































Результаты поиска

Содержание 1734-IB8S

Отзывы:

Allen-Bradley 1734-IB8S, Инструкция по установке и эксплуатации, Страница: 130 / 156

Результаты поиска

Содержание 1734-IB8S

Отзывы: