Allen-Bradley 1718 Ex I/O Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 54

Allen-Bradley 1718 Ex I/O Скачать руководство пользователя страница 15

Rockwell Automation Publication 1718-UM001A-EN-E - December 2019

15

Product Specifications

Chapter 1

that prevents an I/O module from being accidentally inserted into a slot that is
intended for an adapter or a power supply.

Figure 9 - Narrow Modules

Figure 10 - Wide modules

Adapter

Adapters form the interface between the I/O modules and the process control
system. The adapter converts the protocol of the bus integrated in the
backplane to the protocol of the higher-level bus system.

Another adapter variant is the gateway. This is described in more detail below.

The gateway

(check if there’s a gateway module)

can be operated directly via

the touch screen on the front, meaning it can be configured directly in the
field. In addition, the device status is displayed using the four LEDs below the
touch screen.

WARNING:

Explosion hazard as a result of removing coding pins!

Removing the coding pins means explosion protection can no longer be
guaranteed.

Never remove the coding pins from the module.

139,8

28,5

106,6

139,8

57,5

106,6

«
...
13
14
15
16
17
...
»

Содержание 1718 Ex I/O























































Отзывы:

Нет отзывов