manualshive.com logo in svg

Allen-Bradley 1444-AOFX00-04RB, Руководство пользователя, Страница: 541 / 550

Поделиться
Скачать
Allen-Bradley 1444-AOFX00-04RB Скачать руководство пользователя страница 541

Rockwell Automation Publication 1444-UM001D-EN-P - June 2018

541

CIP Objects   

Appendix A

Common Codes and 
Structures

Table 314 - Generic CIP Status Codes 

Code

 Name

Description

0x00 (0)

Success

 Service was successfully performed by the object specified.

0x01 (1)

Connection failure

 A connection-related service failed along the connection path.

0x02 (2)

Resource unavailable

Resources are needed for the object to perform the requested service were unavailable.

0x03 (3)

Invalid parameter value

See Status Code 0x20, which is the preferred value to use for this condition.

0x04 (4)

Path segment error

The path segment identifier or the segment syntax was not understood by the processing node. Path 
processing stops when a path segment error is encountered.

0x05 (5)

Path destination unknown

The path is referencing an object class, instance, or structure element that is not known or is not 
contained in the processing node. Path processing stops when a path destination unknown error is 
encountered.

0x06 (6)

Partial transfer

Only part of the expected data was transferred.

0x07 (7)

Connection lost

The messaging connection was lost.

0x08 (8)

Service not supported

The requested service was not implemented or was not defined for this Object Class/Instance.

0x09 (9)

Invalid attribute value

Invalid attribute data detected.

0x0A (10)

Attribute list error

An attribute in the Get Attribute List or Set Attribute List response has a nonzero status.

0x0B (11)

Already in requested
mode/state

The object is already in the mode/state requested by the service.

0x0C (12)

Object state conflict

The object cannot perform the requested service in its current mode/state

0x0D (13)

Object already exists

The requested instance of object to be created already exists.

0x0E (14)

Attribute not settable

A request to modify a non-modifiable attribute was received.

0x0F (15)

Privilege violation

A permission/privilege check failed.

0x10 (16)

Device state conflict

The current mode/state of the device prohibits the execution of the requested service.

0x11 (17)

Reply data too large

The data to be transmitted in the response buffer is larger than the allocated response buffer.

0x12 (18)

Fragmentation of a primitive
value

The service specified an operation that is going to fragment a primitive data value, such as half a 
REAL data type.

0x13 (19)

Not enough data

The service did not supply enough data to perform the specified operation.

0x14 (20)

Attribute not supported

The attribute that is specified in the request is not supported.

0x15 (21)

Too much data

The service supplied more data than was expected.

0x16 (22)

Object does not exist

The object that is specified does not exist in the device.

0x17 (23)

Service fragmentation sequence not in progress

The fragmentation sequence for this service is not currently active for this data.

0x18 (24)

No stored attribute data

The attribute data of this object was not saved before the requested service.

0x19 (25)

Store operation failure

The attribute data of this object was not saved due to a failure during the attempt.

0x1A (26)

Routing failure, request packet too large

The service request packet was too large for transmission on a network in the path to the 
destination. The routing device was forced to abort the service.

0x1B (27)

Routing failure, response packet too large

The service response packet was too large for transmission on a network in the path from the 
destination. The routing device was forced to abort the service.

0x1C (28)

Missing attribute list entry data

The service did not supply an attribute in a list of attributes that the service needed to perform the 
requested behavior.

0x1D (29)

Invalid attribute value list

The service is returning the list of attributes that are supplied with status information for those 
attributes that were invalid.

Содержание 1444-AOFX00-04RB







































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов