Allen-Bradley 1440-SDM02-01RA, Руководство пользователя, Страница: 121 / 168

Rockwell Automation Publication 1440-UM001D-EN-P - September 2016 119
CIP Objects Appendix B
Services
10 Major Recoverable Fault Set when there is a major recoverable fault.
11 Major Unrecoverable Fault Set when there is a module status fault (module status indicator is solid red).
12…15 Reserved, set to 0
Table 33 - Identity Object Status (Continued)
Bit Name Description
Cause Description Resolution
The boot program
is running.
The main application is missing or corrupt. Update or reinstall the module
firmware.
The Relay
Expansion
module has been
removed.
If an XM-441 Expansion Relay module is present at
power-up and if any of Relay instances 2…5 are
enabled, then a Major Recoverable Fault is indicated if
the Relay Expansion module is removed. Reinstall the missing Relay
Expansion module or disable the
expansion module relays in the
XM-124 configuration.
The 24 Volt power
monitor
measures out-of-
range.
The power supply voltage is less than approximately
19.2V or is greater than approximately 28.8V.
Adjust or replace the power
supply to ensure its output is 24V
10%.
In all cases the XM-124 attempts to continue making measurements, monitoring alarms and managing its relays
regardless of the Major Fault Indication or its cause.
Table 34 - Identity Object Services
Service Code Class/Instance Usage Name
01
h
Instance Get_Attributes_All
05
h
Instance Reset
0E
h
Instance Get_Attribute_Single
10
h
Instance Set_Attribute_Single