M-SQ-SLINK Fitting Note
AP11565 Issue 1
SQ SLink Option Card
M-SQ-SLINK is one of several audio networking options that can be fitted to an
Allen & Heath SQ mixer. It provides a single intelligent SLink socket with a
maximum 128x128ch and 48/96kHz operation.
Fitting the card
1.
Switch the system off.
2.
Use a Torx T8 driver to remove the 2 screws securing the I/O Port
blank panel to the SQ mixer.
3.
Slide the card into the slot and press it firmly into the mating
connector.
4.
Refit the 2 screws to secure the card.
Software and firmware
Download and install the latest version of SQ firmware:
M-SQ-SLINK requires SQ firmware V1.3 or above.
Front panel
Link Status
Flashes to indicate
network activity
SLink port
Locking EtherCon
port
