IP1 Getting Started Guide
6
Issue 2
Packed items
Check you have received the following:
•
IP1 Remote Controller
•
Fitting notes AP11269 (US) / AP11270 (EU)
•
Safety Sheet
1.
Introduction
The IP1 is part of the Allen & Heath IP Series of remote controllers. It interfaces with the
AHM, dLive or Avantis mixing system via standard TCP/IP Network connections and can
therefore be networked with other controllers, computers and third party devices using
standard Ethernet infrastructure. It is powered over Ethernet (PoE).
The IP1 controls and functions are programmed using the AHM System Manager
software, dLive Surface / Director software, or Avantis mixer / Director software, and can
suit a number of applications including:
-
Zone level control.
-
Source selection, for example for background music.
-
Scene / Preset selection, for example to recall different room configurations.
