IP1 Getting Started Guide
11
Issue 2
Programming the Remote Controller
Use the AHM System Manager software, dLive Surface / Director software, or Avantis
mixer / Director software to configure the controller as appropriate.
With dLive, the IP1 can be set to link to either the
MixRack
or the
Surface
. This is
regardless of the physical Network connection, for example the unit might be physically
connected to the MixRack but set to link to the Surface. Linking to the MixRack provides
an independent Remote Controller that can be used with or without Surface connection,
and is recommended for fixed install applications.
The functions and assignments of the IP1 are stored in the dLive / Avantis Scenes or
AHM Presets. They are not stored locally on the Remote Controller.
Refer to the mixer or AHM processor guides available for
