manualshive.com logo in svg

Allegion SIMONS VOSS SmartHandle AX, Руководство пользователя, Страница: 35 / 55

Поделиться
Скачать
Allegion SIMONS VOSS SmartHandle AX Скачать руководство пользователя страница 35

Manual
SmartHandle AX

35 / 55

SimonsVoss

6 | Configuration

Unlock in the authorised time period

always

only when disen-
gaged

always

only when disen-
gaged

SmartHandle AX:
engages to open
as soon as au-
thorisation starts
in the time zone
plan. Behaves in
the same way as
a flip-flop for the
remaining author-
ised time period.

SmartHandle AX:
engages to open
as soon as au-
thorisation starts
in the time zone
plan. No influence
by identification
media for the rest
of the authorised
time period.

SmartHandle AX:
engages to open
as soon as identi-
fication medium is
activated after au-
thorisation starts
in the time zone
plan. Behaves in
the same way as
a flip-flop for the
remaining author-
ised time period.

SmartHandle AX:
engages to open
as soon as identi-
fication medium is
activated after au-
thorisation starts
in the time zone
plan. No influence
by identification
media for the rest
of the authorised
time period.

Locking in the non-authorised time period

Disengage automatically

Disengage manually

always

only when disen-
gaged

always

only when disen-
gaged

SmartHandle AX:
disengages as
soon as author-
isation ends in the
time zone plan.
Identification me-
dia engage ready
to open during
non-authorised
time period for
pre-set pulse dur-
ation.

SmartHandle AX:
disengages as
soon as author-
isation ends in the
time zone plan.
Identification me-
dia engage ready
to open during
non-authorised
time period for
pre-set pulse dur-
ation.

SmartHandle AX:
disengages as
soon as the iden-
tification medium
is activated. Iden-
tification media
engage ready to
open during non-
authorised time
period for pre-set
pulse duration.

Not possible

6.11.2 Turn off LED/beeper

You can also adjust signal settings as you wish.

Open extended
configuration

ü

LSM open.

1. Double-click on the SmartHandle AX entry in the matrix to open the

settings.

Содержание SIMONS VOSS SmartHandle AX
























































Отзывы:

Нет отзывов