A
Install latch.
The bevel must face toward the door stop.
Actual Size
B
Install strike and door position switch (DPS).
Note: If dustbox is included, install first.
CAUTION
DPS and included strike must be installed!
DO NOT DISCARD!
DPS
ANSI Strike
OR
DPS
T-Strike
Actual Size
Actual Size
Door Thickness Adjustment
L
For
1C\v
” thick doors, NO ADJUSTMENT IS REQUIRED.
Continue to step 1.
For
1B\,
” or 2” thick doors, complete the following door
thickness adjustment steps.
A Remove chassis from outside assembly.
Pull lever post and rotate 10 degrees counter-clockwise until
adjustment plate tabs align with cutouts on assembly, then
remove chassis from escutcheon.
B Remove adjustment plate by rotating counter-clockwise.
Remove door thickness insert using pin wrench.
C Reorient and replace door thickness insert.
Door Thickness
Door Thickness Insert
1
B\,
”
2”
Door thickness
insert channel
Chassis Side View