*24827*
24827
Installation and adjustment instructions of low energy door operator
L
Note: This door operator requires additional system components. Please see the LCN Closer Catalog.
Non-Handed/Non-Sized Auto Equalizer
4810
Installation Instructions
Installation
1
Prepare the frame via the template (see page 5), then
secure the mounting plate to the frame with the screws
provided.
2
Secure the operator assembly to the mounting plate
with 4
Z\v
-20 x
2Z\x
screws.
3
Connect the air line to the air inlet fitting.
4
Place the spacer on the operator shaft, then push the
arm onto the operator shaft at approximately 30° to the
door. Secure it with the arm shaft screw.
5
Remove the end cap from the track, insert the track
roller, mount the track on the door, and secure with the
screws provided.
6
Loosen the roller-locking screw in the end of the arm,
open the door part-way (about 30°), pull the arm over
the top of the door, and connect to the track roller.
Tighten the arm-set screw firmly.
How to tell Hand Of Door:
Left
Hand
Door
Right
Hand
Door
Cover
Insert
Cover
Air Inlet
Fitting
Speed
Control
Standoff
1/8" ID Surface Air Inlet Or Concealed
Air Inlet Connectedto Control Box
Mounting
Plate
Track
Track
Roller
Track
Plug
Roller
Locking
Screw
Main
Arm
Arm Shaft
Screw
Cover
Screw
Operator
Assembly
Long
Cover
Screw
Right Hand Shown
Left Hand Opposite
CauTioN
iMPRoPER iNSTaLLaTioN oR REGuLaTioN MaY
RESuLT iN PERSoNaL iNJuRY oR PRoPERTY
DaMaGE. Follow all instructions carefully. For
questions, call LCN at
877-671-7011.
