5 Further information for initial operation
© 2022 Interflex Datensysteme GmbH | IF-5835 Time Recording Terminal | 07.22
15
5 Further information for initial operation
5.1 Restarting the controller
Some changes require a restart of the controller. You can do this directly on the controller or with
the appropriate commands via the console.
1
2
3
RUN LED
DIP switch
Reset button
1
2
3
Warm boot
A warm boot performs the following actions:
n
Close application
n
Restart application
Associated console command:
oc -s
or
factory-reset application-restart
Reboot
A reboot performs the following actions:
n
Close application
n
Shut down operating system
n
Boot operating system
n
Restart application
1. Set switches:
2. Shortly press the Reset button
3. Wait until the RUN LED lights up again (procedure can take up to 30 seconds)
Associated console command:
factory-reset reboot
