4 Initial operation
© 2022 Interflex Datensysteme GmbH | IF-5835 Time Recording Terminal | 07.22
13
4.2 Configuring the controller in IF-6040
In IF-6040 under Access > Access management > Controller:
1. Select
Interflex CHP
under
Options
in the
Transmission protocol
field
2. Enter the
serial number
of the controller under
Connections
.
3. Select a suitable
Configuration
under
Connections > Peripheral server
.
Suitable: The
Controller host protocol and firmware update
option is activated in the
Interfaces
tab and an enabled port is entered. If required, create a suitable configuration.
4. Under
Perform action
, select the
Update controller data on the peripheral server
menu
item
Detailed information on this subject can be found in the IF-6040 documentation
4.3 Registering the controller
Prerequisites
ü
PKI certificate installed and configured
Service interface
1. In
IF-6040
under
Access > Access management > Controller
: Select
Perform action >
Register controller
2. Copy the URL of the IF-6040 in the registration window
3. In the
console
:
Enroll -u <URL of IF-6040>
4. Copy password in the registration window
5. Command
enroll -n <password>
Controller is enrolled on IF-6040.
If the controller was already registered once, the second command should be
enroll -f
.
IF-ServiceApp
To register the controller:
1. Use the USB cable to connect the dongle to the USB port of the controller
The IF-ServiceApp is connected to the controller.
2. Under Access > Access management > Controller menu sequence
Perform action > Register
controller
3. Make a note of the information on the registration window (URL of the TLS server, registration
password (nonce))
4. In the
IF‑ServiceApp
, click on the
Find controller
in the left menu
5. Select the desired controller to establish a connection
A prompt for the controller password is shown
6. Assign a controller password during the initial login
