4 Initial operation
© 2022 Interflex Datensysteme GmbH | IF-4735 Time Recording Terminal | 04.22
15
4.1 Connecting the controller to the network
You can connect the controller to the network via a service cable and the serial service interface or
via WLAN with the IF-ServiceApp.
IF-ServiceApp
Prerequisites
ü
Controller is connected to the IF-ServiceApp.
Detailed information on this subject can be found in the documentation of the IF-ServiceApp.
Service interface
Accessing the controller via SSH requires the freeware PuTTY version 0.73 or higher:
1. Switching on the power supply
2. Establish serial connection between host computer and controller
3. Open PuTTY
4. Check and adjust parameters
5. Start communication with
Open
6. Login with username
fieldservice
7. Define a password
Details on valid password requirements and how to change a password can be found
underUsers and passwords.
Only after entering a password are the network services started and the network connection
can be established.
u
Establish network connection
After the power supply has been switched on, the component executes the following actions: