background image

6 Disposal

Once its service life comes to an end, the device must be disposed of properly
as electronic waste. You can dispose of the device yourself or return it to the
supplier.

Dispose of batteries according to the laws and regulations of your country.

Dispose of batteries at a collection point or insulate the contacts and send the
batteries marked 

Old batteries for disposal

 to the supplier of the product.

7 Declarations of conformity

7.1 EU Declaration of Conformity

Interflex hereby declares that the products comply with the directives 2014/53/
EU (RED) and 2011/65/EU (RoHS).

The complete EU Declaration of Conformity can be found on our website
www.interflex.com.

7.2 UK Declaration of Conformity

The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012

Radio Equipment Regulations 2017

The complete Declaration of Conformity can be found on our website
www.interflex.com.

6 Disposal

The information contained in this manual is to the best of our knowledge accurate and reliable. However, errors or
mistakes cannot be completely ruled out. The information herein is therefore subject to change without prior notice.

The original manual is in German. Other languages are translations of the original manual.

Version: 06.22

Interflex Datensysteme GmbH

+49 711 1322 - 0

Epplestraße 225 (Haus 3)

[email protected]

70567 Stuttgart, Germany

www.interflex.com

© 2022 Interflex Datensysteme GmbH | All specifications are subject to change without notice.

Содержание interflex IF-261






























Отзывы: