SPECIAL INSTRUCTIONS FOR
X571 LOCK
WITH INTERCHANGEABLE CORE
TO CORRECT OUT OF TIME CONDITION
BUTTON DOES NOT OPERATE...
OR KEY WILL NOT ROTATE CLOCKWISE...
THEN THE DOGGING BAR IS OUT OF "TIMING"
TO CORRECT—
1. TAKE OFF INNER KNOB AND ROSE,
AND REMOVE LOCK FROM DOOR.
2. ON OUTSIDE KNOB REMOVE CORE, BACK OFF
TAILPIECE ASS'Y UNTIL IT DISENGAGES FROM
KNOB CATCH.
3. PLACE DOGGING BAR IN POSITION AS
ILLUSTRATED BELOW. LOCK OUTER TRIM
BY PUSHING IN PUSH BUTTON.
4. ENGAGE TAILPIECE ASSEMBLY AND INSERT CORE.
5. RE-INSTALL LOCK ON DOOR.
INNER SPINDLE
OUTER SPINDLE
CORRECT POSITION OF DOGGING BAR.
NOTCH IN DOGGING BAR MUST POINT DOWN INTO LOCK.
DOOR CENTER
