All Things Cedar 10' Teak Market Umbrella, Инструкция по сборке

Страница: 1 / 2


Thank you for choosing All Things Cedar

10' Teak Market Umbrella
(TU90 Assembly & Operational Instructions)
Tools Required:

You will need a Flat Head and a #1 Robertson Screwdriver (optional: hammer)
NOTE: 2 people are required for assembly and installation
STEP 1. Connect Pulley Fitting

Locate the upper most hole on the upper pole and attach pulley fitting
with fitting bolt

Attach pulley fitting with small screw through smaller hole on pulley
fitting
STEP 2. Attach Pulley Rope

Tie one end of Rope to brass eyelet on the umbrella hub

Feed free end of the rope through Pulley Fitting, then tie to the
small hole on the Brass Ring
Package Contents:
(A) Cap … 1
(B) Canopy …1
(C) Umbrella Cage & Upper
Pole…1
(D) Lower Pole …1

Brass Pin … 1
Hardware Pack:

Brass Ring …1

Pulley Fitting …1

Fitting Bolt …1

Small Screw … 1

Rope … 1