Prepare the following items before long-term Storage:
1. Run the engine five minutes.
2. Drain out the engine oil while the engine is warm
And refill with fresh engine oil.
3. Remove the filler screw plug on the cylinder head
Case and refill with about 2cc of engine oil
4. Press down the decompression lever and pull the
Recoil starter 2-3 times (Do not start the engine)
5. Return the decompression lever back to the
decompression position, and pull the recoil starter
slowly until you feel the resistance.(At this point
both intake/exhaust valves are closed to prevent
the engine from rust)
6. Clean off the dirt on the engine surface, then store
the engine in a dry place.
9. LONG-TERM STORAGE
19
APPENDIX 1.OVERALL INSTALLATION DIMENSIONS
20
