all-clad WD822D51, Руководство пользователя

Страница: 15 / 28

15
EN
C L E A N I N G & M A I N T E N A N C E
1. When you are finished cooking, turn the Shade Selector to Off and unplug the power cord. Allow the unit to
cool down completely before handling.
2. Press the plate release buttons to remove plates from the housing. Be sure that the plates have cooled completely
before handling. a. We recommend cleaning the plates after every use. The plate should be washed in warm soapy
water or in a dishwasher. (Fig. 9) Failing to do so may negatively impact the non-stick coating performance.
Never use an abrasive cleanser or harsh pad on the non-stick coating.
3. To clean exterior:
-Polish using stainless steel cleaners approved for household cooking appliances.
-Follow the instructions for use on the polish; then rinse the outside of the waffle maker with a sponge.
NOTE: Do not clean this product with aerosol sprays or the like.
DO NOT USE HARSH DETERGENTS OR SCOURING PADS ON THE EXTERIOR
OF THE WAFFLE MAKER AS THIS MAY DAMAGE THE POLISHED FINISH.
CAUTION: To avoid any risk of injury or accident, check the cord and waffle maker prior to each use.
Do not use the waffle maker if the cord and/or the appliance itself are damaged or are not operating correctly.
• Use the locks to store the waffle maker in a vertical position or when moving the waffle maker, make sure remove
the drip tray before storage. (Fig.10)
5. At the back of the waffle maker there is a batter tray. (Fig. 9) This tray catches any excess batter.
We recommend emptying this tray when the waffle maker is cold. Use oven mitts if the tray must be emptied
while the appliance is hot and in use
6. To turn off your waffle maker at any time, turn the selector knob to the OFF position.