
ZYNQ Ultr FPGA Board AXU7EV User Manual
11 / 68
Amazon Store: https://www.amazon.com/alinx
Part 2: ACU7EV Core Board
Part 2.1: ACU7EV Core Board Introduction
ACU7EV (core board model, the same below) FPGA core board, ZYNQ
chip is based on XCZU7EV-2FFVB1156I of XILINX company Zynq Ult
MPSoCs EG Family.
This core board uses 8 Micron DDR4 chips MT40A512M16GE, of which 4
DDR4 chips are mounted on the PS side to form a 64-bit data bus bandwidth
and 4GB capacity. 4 DDR4 chip is mounted on the PL end, which is a 64-bit
data bus width and a capacity of 4GB. The highest operating speed of DDR4
SDRAM on the PS side can reach 1200MHz (data rate 2400Mbps), and the
highest operating speed of DDR4 SDRAM on the PL side can reach 1200MHz
(data rate 2400Mbps). In addition, two 256MBit QSPI FLASH and an 8GB
eMMC FLASH chip are also integrated on the core board to start storage
configuration and system files.
In order to connect with the carrier board, the four board-to-board
connectors of this core board expand the PS side USB2.0 interface, Gigabit
Ethernet interface, SD card interface and other remaining MIO ports; also
expand 4 pairs of PS MGT high-speed transceiver interface; and 16 GTH
transceivers and almost all IO ports on the PL side (HP I/O: 143, HD I/O: 46).
The wiring between the XCZU7EV chip and the interface has been processed
with equal length and differential, and the core board size is only 3.15*2.36
(inch), which is very suitable for secondary development.