87
•
General:
Name:
Name the trigger event here.
•
Response to event trigger: the time setting of the trigger event
Always:
Always monitoring
During time: Check the date you want to monitor (Sun~Sat) and the duration of monitoring here.
For example, if you want to set the camera to monitor from 7 pm after work to 7 am
next morning from Monday to Friday, check the boxes from Monday to Friday, enter
“19:00” in the “Start From” field, and enter “12:00” in the “Duration” field.
Never:
Do not set the time.
•
Trigger by: sources of trigger events
(Note:
You can only set one trigger event once.
)
Alarm input: The alarm is triggered by the security equipment connected from the DI terminals
behind the machine, such as door/window detectors, infrared sensors.
Motion
Detection:
The alarm is triggered when motion is detected. The camera will send an alarm
when any objects appear in the set detection area.
On boot:
The alarm is triggered by reboot. The camera will send an alarm when the system
is rebooted due to power shortage, sabotage, or other reasons.
Video Loss The alarm is triggered by video loss. The camera will send an alarm when the
camera signal is loss due to power shortage, sabotage, or other reasons.
Blind
Detection
The alarm is triggered when blind is detected. The camera will send an alarm when
any objects disappear in the set detection area.
Net Loss
The alarm is triggered by net loss. The camera will send an alarm when the net is
loss due to power shortage, sabotage, or other reasons.
•
Response process: trigger event response
(Note:
Multiple selections are available
)
Active alarm
out:
An event is detected by the security equipment connected from the DI terminal
behind the machine. You can set the alarm duration in the “Duration” field.
Upload video
to :
The camera will save the Motion JPEG or H.264 video of the event to the Upload
Server (FTP/SMTP) or the Recording Device (Samba/SD Card).
Include pre-trigger buffer:
When an event is detected, the camera will record the
previous video image up to 10 seconds.
Include post-trigger buffer:
When an event is detected, the camera will record
the post video image up to 10 seconds.
Continue video upload:
When the event is continue, the camera will record the
video image up to 10 seconds.
For example:
If the pre-trigger 5 seconds, post-trigger 5 seconds and continue
video upload 5 seconds have been selected, the total file size will be 15 seconds.
Upload img
to :
The camera will save the capture photo of the event to the Upload Server
(FTP/SMTP) or the Recording Storage Device (Samba/SD Card).
Send HTTP
notification:
The alarm will be sent to the HTTP server you specified. To use this function, set
the coordinative HTTP server in the Event Server setting page in advance.
Send TCP
notification:
The alarm will be sent to the TCP Server you specified. To use this function, set the
coordinative TCP server in the Event Server setting page in advance.
Send NAP
notification:
The alarm will be sent to the NAP Server you specified. To use this function, set
the coordinative NAP server in the Event Server setting page in advance.
Day Night
Force the camera turn into Day/Night Mode when the trigger is detected.
Click
Save
to save and activate your settings when you completed setting.
Содержание ALC-9171
