Alinket
ALXB10x User Manual
Alinket Electronic Technology (Shanghai) Co.,Ltd.
All rights reserved. E-mail
：
Section 5 Configuration Guidance
5.1
Configuration Mode
Both wired and wireless configurations mode are supported, and user only need to choose one of
them to configure ALXB10x. Wired configuration channel is recommended.
5.1.1.
Wired configuration mode
Connecting method is illustrated as below:
1) Use micro USB cable and RJ45 network cable to connect ALXB10x and a computer which
installed ALXB10x Configuration Tool;
2) Check the corresponding COM port in your computer's
Device Manager
；
3) Launch the ALXB10x Configuration Tool for Configuration, click
；
4) After configuration
，
remove ALXB10x from the computer and connect it to the customer
’s
device. ALXB10x will automatically connect to the target wireless router to help the customer
device realize wireless networking, as shown in the figure below
：
5) After successfully connecting to the target router, the operating status indicator of ALXB10x
appear to be blue constantly.
