438
Ave., Suite 130 . Torrance, California 90501
Phone: 31
8-8616
Fax: 31
8-8758
MOBILE BRACKET
There are two ways to affix the
to your car window. See interior molding of your car window to
determine which method is best for you.
Method 1
The
clamps to the interior window molding using bracket-A from the top and bracket-6 from the
bottom (see FIG.l). Bracket-A should be hooked over the interior molding while
should be slid
in between the molding and the door panel. Clamp tightly. Slide in the bracketcover all the way to the
of bracket-A and bend the bracket along the curvature of the door panel. Hook the radio-hanger
to the groves of bracket-A (see FIG.4). The bracket-cover may be cut to a desired length for best
operating position.
Method 2
The
hangs bracket-A to the window slit. First fold bracket-A about 1.5 inches from the flat end
(see FIG.2). Insert the folded end into the window slit (see FIG.3). Slide in the bracket cover and bend
the bracket along the curvature of the door panel. Hook the radiihanger to the groves of bracket-A (see
FIG.4). The bracketcover may be cut to a desired length for best operating position.
FIG.1
Glass
Bracket B
Bracket Cover
FIG.4
Slide
cover all the
to
Rubber
FIG.3
the
would help
the bracket
