22
8.4.Record Delete
This function allows you delete all the recording files.
8.5.Recording Manually
In the PC software, Public – Optional Setting – Key function, program a key as Record.
1.Press the programmed Record key, and the radio will start the recording, and
speak into the microphone.
2.Select Record Play, and the radio will play the record
3.Select Record Send, and the radio will display Contact list or Manual Dial.
4.Select Contact list to choose a contact, and press select to send the Record.
5.Select Manual Dial, input the DMR ID, switch group ID or private ID, press select
to send the Record.
8.6.Digital Monitor
This function allow user can hear the voice of an incoming call with the below
conditions.
DigiMoni Switch
Off: Turn off Digital Monitor
Single Slot: Monitor the current time slot.
Double Slot: Monitor time slot 1 and time slot 2
8.6.1.
DigiMoni Cc
Any Cc: Monitor any color code
Same Cc: Monitor the same color code
8.6.2.DigiMoni Id
Any Id: Monitor any talk group
Same Id: Monitor the same Talk group
8.6.3.Slot Hold
Off: Turn off the slot hold
On: Turn on the slot hold
Recommend to turn on slot hold when monitor double slot time slot 1 and time slot 2,
when the signal is disappear in one slot, instead of switching to the other slot at once,
the radio will hold on some seconds and wait for the audio drop.
8.7.How to Respond and Save a call in Digital Monitor Mode
During Digital Monitor, when receive a call with unmatched ID, press [*] key, the
screen will display "Monitor Response Setup Successfully ", press [PTT] key will
response to the call.
Press
key, the radio will remind you choose a Zone, you can choose a zone and
save the new channel to the Zone.
8.8.How to reset the radio
To reset the radio to factory default setting status.
1.Power off the radio.
2.Press and hold [P2] Key + Channel se Power key at the same time to power on
the radio.
The radio will start up with a note on the display – "Are you sure you want to initialize
radio?"
Press Confirm Key to proceed the reset, on the screen displays “Initialize Radio” Then
radio will resume to factory default setting status.
3.After a re-start the radio will display the setting of time zone and the date and the
