14
7
UP / DOWN
keys) to enter the setting and return to original status. The
T/SQ/DCS
icon will remain on the display to show the current selective-
calling status. To exit, simply use the TS/DCS key and press it until the
relative status icon T/TQ/DCS disappears.
The CTCSS encoding and decoding frequencies may be set differently.
The encode setting frequency automatically relates to the decode
setting, but decode setting does not affect encode. The standard set of
50 different CTCSS tones are available. DCS encode/decode cannot be
separated. The list of selectable tones and codes is shown on Appendix
at the end of this booklet.
CTCSS SCAN
Repeatedly press
key until LCD
displays icons ,then hold
key for 1S
to enter into CTCSS scanning. Once finding a
matching CTCSS tone, a voice will be heard
and resumes scanning after 15s.
Repeatedly press
key until LCD
displays DCS icons ,then hold
key for
1S to enter into DCS scanning. Once finding
a matching DCS code,a voice will be heard
and resumes scanning after 15s.
Press
key until LCD display iron,
then press
CALL
key to switch between
high/Mid/low power. The LCD appears:
None: Transmit in high power
Compander function will decrease the
background noise and enhance audio clarity.
Press
1.
key, then press
MONI
key
to turn on compander function, repeat
above operation again to turn off .
W h e n "
2.
" i c o n i s d i s p l a y e d ,
compander is active.
HIGH/MID/LOW Power switch
Compander (Decrease the background noise and ENHANCE
AUDIO CLARITY)
DCS SCAN
: Transmit in middle power
: Transmit in low power
