Alinco DJ-S446, Инструкция по эксплуатации

Страница: 28 / 44

24
5. Advanced Operations
5-1-3 Skip Channel Setting
Memory channels that have "skip"
programmed will not be scanned during
memory scanning. Refer to page 17 for
the setting method.
In the memory channel where a memory
skip is programmed, "SKIP" appears on
the display. The CALL channel is also a
skip channel.
5-1-4 Tone Scan
This is a function to help you find the tone
signal number of a received tone signal.
1. Press and hold the
▲
/
▼
keys for 1
to 2 seconds in the tone squelch setting
mode.
Scanning starts and the decimal point
blinks.
38 different Tone Number are scanned
in order.
If a tone signal number is found,
scanning stops and you can hear the
received signal.
Scanning will not resume until the
▲
/
▼
keys are pressed again.
2. After scanning stops, the Scan mode
is canceled by pressing the PTT key,
the FUNC key or the V/M key.