21
NOTE:
/
key can be setup in programming software without operating the 1 method into Menu1-34.
Menu 1-15 of this transceiver are channel operations. Channel operations temporarily changed the functions
of current channel. When power off or channel has been changed, the relevant setup will be erased. Only
under VFO mode, the channel operations will be saved until next change. Menu 16-34 is background
operation, it is valid for all channels, the relevant setup will be saved until next change.
The operating methods are as follows:
1. Press
key, the top corner of LCD displays " " icon, then press
key to enter function menu.
2. Press
/
key to choose desired function. Press and hold
/
to move menu with a quicker
speed.
3. Press
key to enter to the function menu and select the setting, LCD displays " " icon, press
/
to select desired setting.
Note:In CTCSS/DCS setting, Press
to select CTCSS, DCS or OFF. When select DCS press
to switch
between positive and negative code, In editing name, press
to move downward icon, press
move
upward icon.
4.Press
to return to the menu. Press
/
key to continue settings, or press
or
to confirm
and exit.
FUNCTION MENU SETUP
