19
TX Power Selection
Under standby state, press
key, the top corner of LCD displays "
" icon, then
press
key to choose High/Low power for current channel.
1. When LCD displays "
L
" icon, it means low power is chosen.
2. When LCD displays
"M"
icon, it means Middle power is chosen.
3. When high power is selected the radio screen will not display "
L
" or "
M
".
BASIC OPERATIONS
DTMF code Transmit and Enquiry
1. Press
key, the top corner of LCD displays " " icon, then press
key, LCD displays DTMF
data and group number (total 16 groups) of current group.
2. Press
/
to choose desired group and DTMF data, press [PTT] key to
transmit selected DTMF signaling. If current group does not contain DTMF data,
LCD displays the current group number and "
EMPTY
".
Frequency Reverse
Under standby state, press
key, the top corner of LCD displays "
" icon, then press
key to set
the current channel as frequency reverse, repeat above operation to turn off frequency reverse.
1. When LCD displays "
R
" icon, it means current channel enabled the frequency
reverse function, the TX frequency and RX frequency is interchanged, if CTCSS/
DCS signaling is set, it will also interchange.
2. When "
R
" icon disappears, it means reverse function is close.
