Notes:
l
The trolley must be handled with care.
l
Avoid leaving the trolley in the sun in order to prevent the scanner from reaching extreme temperatures.
l
Make sure the trolley is kept dry to protect the system components from humidity.
l
If the scanner has just been brought into the office from a hot, cold, or humid environment, it should be set aside until it
has adjusted to the room temperature, to avoid internal condensation.
l
Do not check the trolley as baggage when traveling by air, to prevent damage to the scanner that may be caused by
uncontrolled transportation conditions.
2.4.4
Optional protective cover
The trolley is supplied with an optional protective cover that helps protect it against wear and tear and adverse
weather conditions.
Note:
The protective cover provides a certain level of protection against rain, but is not waterproof.
1. Open the VELCRO
®
flap and slip the
protective cover over the trolley handle.
2. Pull down to cover the trolley and then
close the VELCRO
®
flap.
2.4.5
VESA mounting
The scanner provides a standard 100mm VESA mounting interface that can be used for mounting it using 3rd
party VESA-based mounting solutions.
Notes:
l
Ensure that the selected VESA mounting solution supports the following scanner specifications:
o
VESA 100mm
o
Minimum weight: 6kg (including the computing unit, wand, and cradle). We recommend that it supports 9kg.
l
If the scanner has already been assembled, you must remove the power cable and the cradle, as described in
Using the trolley for transportation
l
We recommend that connecting the computing unit to the VESA mount, step 3 below, be performed by two
people.
iTero Element 5D and iTero Element 5D Plus imaging systems User manual
30
© 2022 Align Technology, Inc. All rights reserved.
