You can tap
Return to Scanning
to go back to Scan mode and rescan the missing segments, which are
highlighted in red in the navigation controls.
5.6.2
Using the scan timer
The scan timer enables you to see how long it took to scan the model.
To view the scan time:
1. On the toolbar, tap the
button.
The scan time is displayed.
Figure 116: Scan timer button on the toolbar and scan time
2. Tap
OK
to close the window.
5.7
Sending the scan
After you have scanned the patient and reviewed the case to ensure that no data is missing, you can send the
scan to the lab or to storage, depending on the case type.
To send the scan:
1. Tap
on the toolbar to send the case, including the screenshots if any.
iTero Element 5D and iTero Element 5D Plus imaging systems User manual
116
© 2022 Align Technology, Inc. All rights reserved.
