background image

Removing the front bezel 

WARNING: Before working inside your computer, read the safety information that shipped with your computer and 

follow the steps in 

Before working inside your computer

. After working inside your computer, follow the instructions 

in 

After working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/regulatory_compliance

.

Prerequisites

Remove the 

stability foot

.

2  Remove the left and right side-panels. See “

Removing the side panels

”.

3  Remove the 

handle bars

.

Procedure

Pull the connector downwards and then disconnect the top tron light-cables from the front bezel.

2  Pull the connector downwards and then disconnect the bottom tron light-cables from the front bezel.

3  Remove the two screws (6-32x5.2) from inside, securing the front bezel to the left side of the chassis.
4  Remove the screw (6-32x5.2) from inside, securing the front bezel to the right side of the chassis.
5  Release the tabs from inside the chassis on the right side, securing the front bezel to the chassis.

108

Содержание Area-51 Threadripper Edition R7













































































































































Отзывы: