Alicn Medical (Shenzhen), Inc.
Instruction manual
Non-contact infrared thermometer
Model:
AET-R161
This equipment supports Bluetooth connect mobile
terminals
Thank you for choosing our Non-contact infrared thermometer, type
AET-R161.
Please read this
manual before use.
Product information
Name:
Non-contact infrared thermometer
Mode:
AET-R161
Manufacturer: Alicn Medical (Shenzhen), Inc.
Address: 4/F, No.5 Building, 2nd Section BaiWangxin Hi-Tech Park, Xili, Nanshan District,
Shenzhen City, China
Tel: 0086-0755-26501548 Fax: 0086-0755-26504849 Email: [email protected]
Website: http://www.alicn.com
Caution
1. The device complies with RF specifications when the device used at 0mm form your body. This
product can be used across EU member states.
2. This thermometer is calibrated at the time of manufactured, if the thermometer is use according
to the instruction, periodic recalibration is not required. Do not scratch the probe, or may cause
inaccuracy.
3. This thermometer is intended for household and clinic use.
4. Remove the batteries if the thermometer is not going to be used for long period time.
5. This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
