1
www.observint.com
ALI-TS1132VR_CQ
180418
Power
Connector
Audio Out
RCA Connector
HD-TVI Video
BNC Connector
Camera drop cable connectors
What’s in the box
•
Camera assembly
•
Drill template
•
Video test cable
•
Adjuster (for camera module)
•
Security L- wrench
•
Mounting hardware (screws and wall inserts)
•
Pad
•
This manual
Security L-wrench
Adjuster
Mounting
hardware
Pad
Video test cable
Tools you need
To install the camera, you will need:
•
12 Vdc power source. See Specifications for voltage and wattage requirements.
•
Tools and additional fasteners (may be required) for mounting the camera
•
HD-TVI compatible video recorder with monitor
•
Video, audio and power extension cables
•
CCTV video setup monitor (optional)
Installation
Before installation:
•
Make sure that the device is in good condition and all the assembly parts are included.
•
Check the specification of the products for the installation environment.
•
Make sure that the wall or the ceiling is strong enough to withstand 3 times the weight of the camera.
•
To avoid fire or shock hazard, use only UL listed power supplies. Verify that the power supply will
provide the rated voltage and wattage for the camera. See the
Specifications
section.
During installation:
•
Camera Lens
: Handle the camera carefully to prevent scratching or soiling the lens. If the lens or IR
array shield becomes soiled, clean it only with approved products. See the
Cleaning
section.
•
Monitor impedance
: Set the monitor impedance switch to 75 Ω.
•
Power supply
:
Camera drop cable
: The camera drop cable includes three connectors:
—
Audio RCA connector
: Connect the audio drop cable to a RCA extension cable.
—
Video BNC connector
: For transmission of the HD-TVI video signal across a coax (75 Ω) BNC
extension cable.
—
Power connector:
When applying Vdc power, observe the power polarity. See the picture
above for connector polarity configuration.
1.
Using the drill template provided with your camera, mark the location of the two screws that anchor
the base assembly to the mounting surface. If you are routing the drop cable through base, also
mark the position of the hole for the drop cable. (See the template above.)
ALI-TS1132VR 2MP HD-TVI Low Light
Infrared Mini Dome Camera
Installation and User Guide
The ALIBI ALI-TS1132VR dome camera include a high sensitivity CMOS sensor with advanced circuit design
technology. It features HD-TVI encoded 1080p resolution, low noise feature which makes them suitable for
surveillance and image processing systems.
Features
•
2 Megapixel @ 1080p video
•
0.005 lux color Sony Starlight sensor
•
120dB Wide Dynamic Range
•
2.8mm @ 100° field of view
•
65’ Smart IR distance
•
Built-in microphone
•
UTC Up the Coax control
•
Compact size
1.83
"
3.92
"
ALI-TS1132VR camera assembly front and side views
3.82
"
Drop cable
Microphone
Base
assembly
IR array
Lens
Camera
module
Pan
adjust.
lock screw
OSD
joystick
Hole for
mounting
screw
Hole for
mounting
screw
Jack for
video test
cable
Hole for
cover
screw (4)
ALI-TS1132VR camera internal components
