ALIBI ALI-NVR71128R, Руководство пользователя

Страница: 61 / 232

53 Alibi™ NVR Firmware V3.6.22 User Manual
4. If you are controlling the camera through the RS-485 network, enter the PTZ Protocol and Address parameters of the PTZ
camera as needed.
5. Click
OK
to save the settings and close the window.
5.3 Setting PTZ presets, patrols and patterns
NOTE
The presets, patrols and patterns you configure must be supported by the PTZ protocols.
5.3.1 Customizing Presets
A Preset is a pre-configured setting of a PTZ camera that usually includes, it’s direction, zoom, iris setting and focus, and may
include other settings. Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes
place. You can create up to 255 presets, numbered 1 .. 255.
1. Open the PTZ settings menu. Go to:
Menu | Camera | PTZ
.
2. Use the directional button to point the camera at the position where you want to create a preset.
3. Click the field to the right of
Preset , use the pop-up virtual keyboard to enter a number to assign to the preset, and then click
the
8
key.
4. Click the Set button (just beneath the Preset line) to save the preset.
SECTION 5: PTZ CONTROLS