ALIBI ALI-NS8014VR, Полное руководство по установке и настройке

Страница: 16 / 42

10
6. Insert the microSD card into the card slot until it clicks into position. A properly installed card is shown in the photo below.
microSD card installed
7. Reinstall the maintenance access cover.
8. Remove all dust and other contaminants from inside the dome if necessary, and then reinstall the camera dome cover.
9. Reinstall the four dome screw covers removed earlier.
2.3 Camera ceiling mount installation
To mount the camera onto a ceiling:
1. Determine how the camera will be powered. The camera can be powered through the Ethernet cable with PoE, or with the
12 Vdc power adapter provided.
2. Determine the best location for installing the PTZ camera. Make sure the mounting surface is strong enough to withstand at
least 8 times the weight of the camera assembly and accessories.
3. Determine the best screws for anchoring the adapter plate to them mounting surface. Mounting screws and wall inserts are
sufficient for some surfaces, but more appropriate fasteners may be required.
4. Use the drill template provided to mark the holes for the adapter plate mounting screws and the camera drop cables, if
necessary. Notice that the drill template is marked for the “FRONT” of the camera.
SECTION 2: INSTALLATION