ALIBI ALI-NP7022RT, Руководство по установке

Страница: 25 / 39

19 ALI-NP7022RT IP PTZ Camera Installation Guide
2. Click the
Activate
button. In the Activate window, you will create a password for the admin (administrator) username.
a. In the Activate window, enter an a password for admin in the
New Password
field. Include a combination of uppercase,
lowercase alphabetic characters and numbers to create a “Strong” password. The rating is shown beneath the field. See
above.
b. Enter the admin password again in the
Confirm
field, and then click
Activate
. In the screen below, notice that the
device Security status shows “Active”. Record your admin password for reference later.
CAUTION

If you lose your admin (administrator) password, you cannot configure the device or restore it to its factory settings. To reset your
password, call your support organization for specific instructions.
Notice that although the device is now activated, it retained the default IP address.
3.3 Modify Network Parameters
You can change the network parameters of devices that are active.
1. In the list of devices discovered, click on the device you want to change the network settings for, and then click the select box
to check it. See below.
SECTION 3: CONFIGURE NETWORK ACCESS