1
www.observint.com
ALI-IPV5030RMH_CQ
12/11/14
Extension
cable
access
Holes for
mounting
the base (12)
Safety
cable
Camera with dome cover removed
What’s in the box
Your camera includes these items:
•
Security L-wrench
•
Video test cable (BNC adapter)
•
Mounting hardware including screws, wall inserts, and toggle bolts
•
LAN drop cable seal kit
•
Sponge seal for surface mounting
•
Drill template for surface mounting
•
Drill template for recessed mounting
•
CD with documentation and the Alibi Discover software utility
•
This document
Step 1. Install a microSD card in the camera
A microSD card installed in the camera provides local storage for log information, capture files, and
recorded video. This information can be downloaded to a network PC by accessing the camera web
interface with Microsoft Internet Explorer (see “Step 5. Remote login” on page 3). microSD cards can be
as large as 64GB. To install a microSD card in the camera:
1.
Loosen the captive screws that secure the dome assembly, and then lift it off and set it to the side.
The dome assembly is attached to the camera assembly with a safety cable.
2.
Insert a microSD card into the slot shown in the photo below.
microSD
card slot
with card
partially
installed
3.
Push the microSD card into the slot until it clicks into place.
microSD
card slot
with card
fully
installed
4.
Reattach the dome assembly.
ALI-IPV5030RMH 3.0 MP IP Dome
Camera Quick Installation Guide
This document guides you through the basic steps to install and configure the ALI-IPV5030RMH cameras.
The camera features:
•
Up to 2048 x 1536 resolution
•
Full HD 1080p video
•
Smart Codec, Smart VQD, Smart Facial Detection
•
120 dB WDR, 3D DNR
•
Triple streams
•
On-board storage, up to 64 GB
•
Smart Focus: 8~12 mm Motorized VF lens
•
Intrusion Detection
•
Built-in heater & fan
•
Defog
•
People Counting
•
Built-in heater
For more information about the software features of this camera, please refer to the
ALI-IP Camera
Software User Manual
.
Dome
assembly
IR array
Base
Captive dome
screws (3)
Lens
Dome
assembly
Camera
assembly
Captive camera
assembly mounting
screws (4)
Safety
cable
Video test
monitor
cable
connecto
r
MicroSD
card slot
with card
partially
installed
Status LED
Reset
button*
* Press the RESET button for 10 seconds when the camera is powering on or rebooting to restore the
default settings, including the user name, password, IP address, the port number, etc.
