1
www.observint.com
ALI-IPU30xxR_CQ
2/11/14
Step 1. Install the camera
1.
Determine the best fasteners for securing the camera to mounting surface. The mounting hardware
provided is suitable for most surfaces.
2.
Using the Drill Template provided, mark the location of the mounting screw holes. If the drop cable
will be routed through the mounting surface, mark the location of the hole for the cable.
NOTE
: The
drop cable can be routed through the cable channel on the side of the base.
3.
Drill holes for the mounting fasteners, and for the drop cable if needed.
4.
Route the drop cable as planned, then secure the mounting base to the surface with the fasteners.
5.
Wire the ground terminal on the back of the camera to an earth grounded conductor.
Step 2. Connect the camera to the LAN and power it on
1.
Route a Ethernet LAN cable to the camera and plug it into the Ethernet connector. Seal the
connection from moisture and other contamination. A weatherproof fitting is provided.
Ethernet connector
Drop cable
12 Vdc Power
connector
If the camera is powered through the LAN cable (PoE), apply power to the cable to power on the
camera, then continue to “Step 3. Install the Alibi Discover Tool” on page 1.
2.
Route a 12 Vdc power cable to the camera and connect it to the 12 Vdc connector on the camera
drop cable. The polarity of the drop cable connector is shown below.
CAUTION
Before applying power to the camera, ensure that the polarity is correct. An incorrect connection
may cause a malfunction and can damage the camera.
Seal the power cable connectors as needed from moisture and other contamination.
Apply power to the cable to power on the camera.
Step 3. Install the Alibi Discover Tool
The Alibi Discover Tool is a software utility used to “discover” Alibi cameras and NVRs/DVRs installed on the
LAN and change their network settings. The tool is provided on the CD with your camera. To use the tool:
1.
Insert the software CD provided with your camera into an optical drive on the Microsoft Windows
computer you will use to access your camera on the LAN.
2.
On the CD, find the folder that contains the Alibi Discover Tool.
3.
Copy the files in the folder to a new directory on your computer. The files should appear as shown in
the directory shown below.
4.
To open the Alibi Discover Tool, double click the file
Alibi Discover Tool.exe
. The tool will
automatically discover Alibi cameras and recorders installed on the network.
ALI-IPU30 Series IP Bullet Cameras
Quick Installation Guide
This document guides you through the basic steps to install and configure the ALI-IPU30 Series cameras,
including the ALI-IPU3013R and ALI-IPU3030R. For more information about the features of these cameras,
please refer to the
ALI-IP Camera Software User Manual
.
Sun shield adjustment screw
Sun shield
IR array
Lens
Ground terminal
Reset button
(recessed)
Cable channel
Drop cable
Adjustable bracket
lock nut
Adjustable bracket
Mounting base
Features
•
Megapixel CMOS progressive scan sensor
•
High definition video streaming with Dual-stream video support
•
Video stream compression using H.264 standard
•
3D-DNR noise reduction and Wide Dynamic Range (WDR)
•
Backlight compensation
•
IR sensors for night vision
•
Dual power capable - Power over Ethernet (PoE) or 12 Vdc
•
Weatherproof - IP66 rated
What’s in the box
Box contains this document with the items shown below.
Drill Template
Documentation and
Installation Tool CD
Weatherproof fitting
for Ethernet cable
Mounting screws
and wall inserts
