Algocraft WriteNow! Series, Руководство по оборудованию

Страница: 8 / 26

WriteNow! Hardware Manual
8
LEDs
The LEDs on the top cover of the instrument, from top to bottom, indicate:
1. POWER: the instrument is turned on.
2. STATUS: indicates system warnings. Normally off, blinks if the system needs user action.
3. BUSY: turns on when programming (when a programming project is being executed).
4. OK/ERR: result of the programming. Each programming site has an OK/ERR LED, which
turns green if the programming on that site has been successful, red otherwise.
WN-PRG01A LEDs
WN-PRG02A LEDs
WN-PRG04A LEDs
WN-PRG08A LEDs
Additional Documentation
This hardware manual provides information about how to set up WriteNow! and
its hardware characteristics.
For any information about WriteNow! commands and their syntax, please refer to
the WriteNow!
Programmer’s Manual, included (in PDF format) in the WriteNow! setup.