Algocraft WriteNow! Series, Руководство по оборудованию

Страница: 10 / 26

WriteNow! Hardware Manual
10
Project setup
Projects are sequences of commands collected in a text file. The project file contains all
the target device information and user settings. Use the WriteNow! Project Generator
utility to create or edit a project file and then follow the Project Creation Wizard steps.
Connect to Target Device
Connect WriteNow! to your target system through the ISP connector(s). To view the
connections for your selected target device, select
Project > Show ISP Connections
.
Interfacing with your Test/Programming
Equipment
WriteNow! can be controlled in three other ways:
•
By manually sending commands and receiving answers, using the Project
Generator Terminal or any other terminal application;
•
By configuring the instrument so that it can work in standalone, thus without a
connection to a PC;
•
By building your own PC software that interfaces to the instrument (for more
information, see
“WriteNow! API” on Programmer’s Manual).
Hardware Test
The diagnostic procedure is a very easy way to verify if any hardware faults occur. Use
the provided test-board to check the programmer hardware functionality.
Programming Drivers and Licenses
WriteNow! comes with preinstalled programming drivers (algorithms) that support
common microcontrollers and memories. When you purchase a new programming
driver, you are supplied with a new driver file (.wnd) and an updated license file (.wnl).
The license file enables the use of all of your purchased drivers on your specific
WriteNow! unit.
You must copy these files to the unit’s internal memory: the driver file must be copied to
the unit’s
\drivers
folder, and the license file to the unit’s
\sys
folder. Please refer to
WriteNow! Programmer’s Manual for more information.