ALGE-Timing Timy3 WP, Руководство пользователя

Страница: 23 / 40

Manual
Timy3 - General
-23-
9.2.12 AUTOMATIC PROG
If <ON> is selected in the automatic program, the Timy3 always starts with the program cur-
rently in use (for example Stopwatch).
This feature is recommended if the user always uses the same program.
9.2.13 SYNC
You can re-synchronize the Timy3 in this menu (enter new time of day).
9.3 CHANNELS
Configuration of the timing channels:
9.3.1 INTERNAL
9.3.1.1 DELAY
The delay time of the internal timing channels c0, c1, c2, c3, c4, c5, c6, c7 and c8 can be set.
Delay time is the time after which the channel is blocked after an impulse, to prevent multiple
impulses (see point 5.2).
•
<DELAY START C0> standard is 1.00 second
•
<DELAY C1-C8> standard is 0.30 second
•
<DELAY C1> not always available!
•
<DELAY C2>
•
<DELAY C3>
•
<DELAY C4>
•
<DELAY C5>
•
<DELAY C6>
•
<DELAY C7<
•
<DELAY C8>
9.3.1.2 0.1s-CORRECTION
If impulses are transmitted by the TED or an external WTN, the 0.1 seconds delay can auto-
matically be corrected for every channel. This function is not adjustable at the Timy3 when the
internal WTN is activated as the correction is then automatically activated.
9.3.1.3 EDGE
This is for setting of triggering the impulses either on closing and/or opening. Standard for all
channels is on closing (falling edge).
For channel C0, C1, C2, C3, C4 and C5 the edge is adjustable. You can either set each of
these 6 channels individual or all together.
C0 – C5:

impulse when contact is closing (factory setting)

impulse when contact is opening

+

impulse when contact is closing and opening

AS TRIGGER When an impulse comes from the WTN (radio), it is processed
via the edge in Timy3 and not as a data packet. This is important
for synchronization. This setting is only available if you adjust C0
- C5 (not for a single channel).
You can adjust at the WTN if a timing impulse has an output of the falling edge <EDGE1>
or of both edges <EDGE2>.