ALGE-Timing TDC8001, Руководство пользователя

Страница: 59 / 112

Manual
TdC 8001
-59-
6.3 Parallel Slalom
6.3.1 Parallel Diff. (parallel slalom with finish difference time), program 4
− Enter for every pair a heat number (automatic counting 1 – 9999)
−
Two photocells are required for the finish, one for the blue and red course each
−
The first photocell impulse triggers the timing; the second one stops the clock.
− Winner course and time margin of winner are shown (R = red, B = blue)
−
No cabling from start to finish for timing is necessary
−
Connect photocell red course to channel 1 (cable 001-10 to jack 19 or 20)
− Connect photocell blue course to channel 4 (cable 001-10 to jack 21)
Activation procedure:
−
Turn on TdC 8001 (switch g)
−
Select program parallel slalom difference (program 4) with cursor keys and <ENTER>
− Clear memory for race that is used and <ENTER>
−
Select race and <ENTER>
−
Synchronized TdC 8001 (possibly with other timing devices)
− <F1> to accept displayed time of day
− At the next full minute a start impulse is issued via channel c0.
−
TdC 8001 is ready for timing.
−
<F2> if display (5) shows incorrect time of day
−
Enter time with finish keypad (8) and confirm with <ENTER>
− Start the clock with a start signal (<START> or channel c0)
−
TdC 8001 is ready for timing.
Race procedure:
− Enter * and + on keypad (9), middle segment on display (1) is on upper position
− Displays (1) and (6) show automatically heat number 1.
−
For a different heat number, enter it with keypad (8) or (12) and confirm with <ENTER>
−
Displays (1) and (6) must show correct heat number.
− Display (5) shows time 0.000
− Press <ALT> and <MENU> at the same time to enter the main menu.
−
Press

once to show menu 28 penalty time
−
Check penalty time:
− If penalty time is correct press <ALT> and <MENU> at the same time for exit.
−
If penalty time is incorrect press <YES>:
−
Enter correct penalty time with finish keypad (8)