ALGE-Timing OPTIc3 Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 121

ALGE-Timing OPTIc3 Скачать руководство пользователя страница 67

Manual

Photo Finish OPTIc3

- 67-

After you set the lanes the configuration will be used for all heats that have no recording.
Heats that have already recorded pictures will keep the old previous configuration.

The lane number is green if it does not yet have a time.

The lane number is red if it already has a time.

The lane number is blue if this lane is unoccupied.

11.4 BIB Evaluation

Make the evaluation with bib numbers (ID-number) for events with
a mass arrival at the finish. In this evaluation each competitor
needs a bib number that is well visible.

•

Move the <Time Cursor> to the correct position for the

competitor to be evaluated.

•

Press the right mouse button.

•

Enter the bib number.

•

If you use the group mode you can also enter the group

(not possible for track and field).

•

When using track and field, you can also enter the lane

number instead of the bib number.

11.5 Three different lines in the photo finish picture

«
...
65
66
67
68
69
...
»

Содержание OPTIc3


























































































































Отзывы:

Нет отзывов