ALF-SCK41TS
36
8. Firmware Upgrade
1) Prepare the latest upgrade file (.bin) and rename it as “FW_MV bin” on PC.
2) Power off the switcher and connect the
FIRMWARE
port of switcher to the PC with
a type-A USB cable.
3) Power on the switcher, the PC will automatically detect a U-disk named
“BOOTDISK”.
4) Directly copy the latest upgrade file (.bin) to the “BOOTDISK” U-disk.
5) Reopen the U-disk to check whether there is a filename “SUCCESS.TXT”, if yes,
the firmware was updated successfully, if not, the firmware updating has failed, the
name of upgrade file (.bin) should be confirmed again, and then follow the above
steps again to update.
6) Remove the type-A USB cable after firmware upgrade.
7) After firmware upgrade, the switcher should be restored to factory default by
sending a command.
Содержание ALF-SCK41TS
Страница 12: ...ALF SCK41TS 8 3 4 System Connection...