ALFAtron ALF-21E-CODEC, Руководство пользователя

Страница: 18 / 28

Alfatron ALF-21E-CODEC
14
6.2.5 CEC/RS232 Function Setting
The ending mark of command is “<CR><LF>”.
Command Description
Command & Feedback
Example
#SET_SYNCACT_CEC 1
Enable the function of automatically sending
CEC commands.
When detecting video input signal or not
detecting any video signal, the switcher will
automatically send the corresponding CEC
command to control the display device.
@SYNCACT_CEC 1
#SET_SYNCACT_CEC 0
Disable the function of automatically sending
CEC commands.
@SYNCACT_CEC 0
#GET_SYNCACT_CEC
Get the function setting status of
automatically sending CEC commands.
@SYNCACT_CEC 1
#SET_SYNCACT_RS232
1
Enable the function of automatically sending
RS232 commands.
When detecting video input signal or not
detecting any video signal, the switcher will
automatically send the corresponding RS232
command to control the display device.
@SYNCACT_RS232 1
#SET_SYNCACT_RS232
0 Disable the function of automatically sending
RS232 commands.
@SYNCACT_RS232 0
#GET_SYNCACT_RS232
Get the function setting status of
automatically sending RS232 commands.
@SYNCACT_RS232 1
#SET_DTIME
[PARAM1]: [PARAM2]
When not detecting video input signal, set the
auto power-off time of display device to
[PARAM1]: [PARAM2]. The default time is 10
minutes.
[PARAM1]=0~30 minutes.
[PARAM2]=0~1800 seconds.
#SET_DTIME 1:30
@DTIME 1:30
#GET_DTIME Get the auto power-off time of display device. @DTIME 30:0