10
Make sure the stove and the ash are cool. Clean the glass with a soft cloth. Glass is made from pyrocheramics resistant to
high temperatures. In case of damage, before re-using the stove, replace the glass. The glass must be replaced only by the
authorized persons.
Smoke exhaust fan area should be checked and cleaned every six months.
Make sure the stove and the ash are cool.
Cleaning the interior flue exhaust is done by first removing the cover on the bottom of the box for the ashes and inserting
the vacuum cleaner hose through that hole, as to vacuum out the remaining ashes, Figure 14.
Figure 14
- GENERAL CLEANING AT THE END OF THE HEATING SEASON
Make sure the stove and the ash are cool - unplug the stove from the power supply.
At the end of the heating season, to be safe, unplug the stove from the power supply. It is important to clean and check the
stove, as explained in the above points.
Make sure the stove and the ash are cool.
After prolonged use, it is possible that the asbestos tape for sealing the door separates. This sealing tape sticks to the door
with silicone resistant to high temperatures. To resolve this, tape the back of it using an adhesive that is resistant to high
temperatures. This is very important for good sealing of the doors.
CLEANING AND MAINTENANCE (for employees who do maintenance)
FLUES - CHIMNEY should be cleaned every six months or after burning two tons of pellets.
Make sure the stove and the ash are cool.
The smoke channel (chimney) is resistant to wind and has to be checked and cleaned every year, best at the beginning of
the heating season. It is best to pay the authorized professional contractors for their cleaning. The places that need special
attention when cleaning are shown in Figure 15.
Figure 15: Places that need to be cleaned at least twice a year
SPECIAL MAINTENANCE
Your stove is a heat generator that uses pellets as solid biofuel. This is why you should do special maintenance once a
year.
This is best done at the beginning of the heating season.
The purpose of the special maintenance is to ensure proper and efficient operation of the stove.
IMPORTANT SAFETY INFORMATION
You have purchased a product of the highest quality.
The manufacturer is always at your service to provide you with all the information you may need regarding the stove and
instructions for assembly and installation in your geographical conditions. Properly connecting the stove, according to these
instructions, is very important to prevent the danger of fire and any defects.
The stove works with a combustion suction pressure. Therefore, make sure that the smoke is well thermally insulated.
DANGER !
In case of fire in the smoke exhaust pipe take all the people and pets out of the room, unplug the power supply using the
power switch in the house or remove the plug from the wall (plug must always be easily accessible and free of obstacles), and
immediately call the fire department.
Lower flue
exhaust (lower
ash box)
