background image

 

 

1.

 

INTRODUCTION 

 

The purpose of these instructions is to enable the user to take all necessary measures to ensure the safe and proper use of 

the cooker. 

ALFA PLAM reserves the right to change the specifications and technical and/or functional characteristics of the  cooker at 

any time, without prior notice. 

 

1.1.

 

PURPOSE 

The pellet burning cooker is intended for heating the living space. The cooker provides direct heating of the room in which it 

is installed and does not require additional heating bodies (radiators), because it uniformly heats the room through radiation and 
convection. The cooker operates only with firebox door closed. Never open the door during operation of the cooker. 

The cooker is characterized by double combustion system, PRIMARY and SECONDARY, with positive effects both in terms of 

performance, and in terms of cleaner combustion products. 

The stated purpose and the intended configurations of the  cooker are the only ones allowed by the manufacturer:  use the 

cooker only in accordance with these instructions

ALFA PLAM cooker is an appliance that can be used only indoors.  

 

1.2.

 

PURPOSE AND CONTENT OF INSTRUCTIONS 

The purpose of the instructions is to enable the user to take all necessary measures in order to achieve safe and proper use 

of  the  cooker.  These  instructions  contain  all  the  necessary  information  on  installation,  use  and  maintenance  of  the  cooker. 
Conscientious compliance with the guidelines from the instructions guarantees a high degree of safety and performance of the 
cooker.  The  instructions  must  be  carefully  kept  and  must  always  be  available  for  consultation,  both  by  the  user  and  by 
personnel in charge of assembly and maintenance. Use and maintenance instructions are an integral part of the cooker. In the 
event of losing the instructions, ask ALFA PLAM for another copy. 

      In the case of sale of the cooker, the user is obliged to submit these instructions to the new buyer.  

 

1.3.

 

UPDATING THE INSTRUCTIONS  

These instructions correspond to the technical level of knowledge at the moment of introduction of the cooker to the market. 

ALFA PLAM will not consider other cookers that are already present on the market, with the appropriate technical 
documentation, as incomplete or inadequate in case of possible changes, adjustments or application of new technologies on 
newly manufactured cookers. 

 

1.4.

 

GENERAL 

INFORMATION 
When contacting the cooker manufacturer, it is necessary to note the serial number and identification data listed on the page 

“GENERAL” at the end of these instructions. 

RESPONSIBILITY 
The company ALFA PLAM accepts no liability for any material damage or injuries occurred due to
- disregarding the advices and warnings given in these instructions, 
- improper use of the cooker by the user, 
- modifications and repairs not approved by ALFA PLAM, 
- poor maintenance, 
- unforeseen events, 
- use of spare parts that are not original or not intended for these models of the cooker.  
The installer takes the full responsibility for connections of the cooker.  
EXTRAORDINARY MAINTENANCE 
Extraordinary maintenance must be carried out by personnel qualified for intervention on the cooker model to which these 

instructions apply.  

USE 
When using the cooker, the advices given in these instructions and all national regulations of the country where the cooker is 

installed is to be followed. 

 

1.5.

 

LEGAL WARRANTY 

In order to be able to use a legal warranty in accordance with CEE 1994/44/CE, the user must strictly adhere to the 

allegations contained in these instructions, and in particular:  

         - to use the cooker in accordance with its intended purpose, 
         - to maintain it regularly and carefully, 
         - to authorize persons with sufficient abilities, responsibility and technical knowledge, for the use of the cooker. 
Failure to observe the advices given in these instructions will result in a loss of warranty. 

 

1.6.

 

RESPONSIBILITY OF THE MANUFACTURER  

      The manufacturer does not accept any civil or criminal liability, direct or indirect, in the event of: 
-  installations  that  do  not  comply  with  applicable  national  regulations  in  the  country  of  installation,  and  with  safety 

recommendations, 

- disregard of the advices and warnings given in these instructions, 

Содержание ALFA TERM 20 PELET
































Отзывы: