15
Description of settings in the Programming menu:
Selection of program
Buttons
Display on the screen
Selected program flashes
Entering submenu
P3
Choosing the desired program
P4 i P6
Exit menu
P1
There are three separate types of programming. For example, if Daily program is activated, other programs remain
unchanged. After completion of the programming, it is necessary to select the desired modality in the Modality menu to enable
the system to be turned on/off during the specified time periods.
Description of the settings of the desired program in the Chrono menu:
CHRONO PROGRAM
Buttons
After selecting the desired program, select the time period for turning on/off
P4 or P6
Entering the change mode (selected time flashes)
P3
Change of time
P4 or P6
Saving the change in the program
P3
Turning on the program (
appears) or turning of the program (
disappears)
P5
Exit
P1
There are three types of programs that can be chosen:
Daily program - the week day is selected and the system on and off times are programmed. There are three time ranges
for each day.
Weekly program - system on/off times are programmed for the whole week. There are three time ranges for setting up.
Weekend program - is selected between two periods “Monday-Friday” and “Saturday-Sunday”. For both periods there
are three time ranges for setting.
14.3. 4.
MANUAL PELLET S LOAD ING MENU
This menu allows manual turning on/off of pellets dosing. This operation can be done only when the boiler is in OFF state.